 |
|
|
| |
|
|
| |
|
|
| |
 |
|
| |
|
|
| |
 |
|
|
|
 |
|
|
|
|
|
|
Staircases
Fire Escapes
Walkways
Access Ramps
Entrance Ways
Wash Rooms
Cold Rooms
Muster Stations |
Warehouse Floors
Production Areas
Loading Bays
Pontoons
Footbridges
Steps
Landings
Factory Floors |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
 |
|
|
|
Our aim is to provide you with the right product for the right job because all
working areas are different.
These products can be fixed straight over any existing solid surface.
|
|
|
|
|
The Problem
Slips, Trips and Falls are the most common cause of major injuries in workplaces
including members of the public who also suffer the effects of inadequate controls
on slip and trip hazards.
The financial cost of slip and trip incidents are considerable.
The cause of such accidents are very simple to prevent, but all too often they are overlooked.
Resistance to high levels of foot traffic.
We provide a full service from specification to installation or supply only.
|
|
The Solution
We can supply everything to suit your specific requirements. We can provide you
with tailor made, cost effective solutions to everyday slip and trip hazards.
- Positive safety enhancement
- Solid finished product means no long paint cure times
- Made to measure and standard sizes available
- Can be installed on almost any walking surface
- Wide range of colours available to highlight safe areas
- Resistant to oil, grease, impact and corrosion
- Ideal product to create identified walkways including DDA Issues
- Minimal Preparation required
- Internals and External use
- Once installed can be walked on immediately
- Large sheet sizes available
- Will easily withstand forklift trucks and vehicular traffic
- Can be bonded, screwed, bolted or riveted
- Easy to clean using power wash, scrub machine, hose jet or deck brush
- Long term value for money solutions
|
|
|
|
'Blister' on-street and off-street GRP Tactiles - Provides warning to visually impaired people of the presence of hazards at crossing points.
Conforms to DETR Guidelines. Satisfies building regulations 2000 (section 1.33c) |
|
'Corduroy' GRP Tactiles - Provides warning to visually impaired people of the presence of hazards, where a change in elevation exist such as the top and bottom of a flight of stairs etc
Conforms to DETR Guidelines. Satisfies building regulations 2000 (section 1.33c) |
|
|
 |
|
|
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
Isophathalic polyester resin provides good chemical properties used to seal the surface of the anti-slip substrate ensuring that the selected high grade aluminium oxide aggregate can not become detached from the GRP Sheet. This prevents wear out and provides a long lasting solution.
UK Manufactured and/or Imported to ISO 9001 Accredited. |
|
|
|
Types & Sizes
GRP Stair Covers
Supplied up to a width of 3000mm, depth of 350mm and thickness of 3.5mm to 4mm + with a
down-stand nosing up to 55mm which can include a contrasting highlighted edge.
GRP Stair Nosings
Supplied up to a width of 3000mm and depth of 55mm with a 55mm down-stand
nosing specifically designed to comply with the DDA Regulations and Building
Regulations Part M.
Landing Covers/Flat Sheets
Supplied up to a width of 3000mm and a depth of 1220mm. Ideal for footbridges,
point covers, signal gantries, pedestrian walkways and ramps, platforms and staircases.
Lower Life Cycle Cost - No Regular Maintenance or Expensive Repair & Replacement. |
|
Thickness of Products
Low Profile
1.2mm thick sheet designed for surfaces that are uneven or subject to lighter foot traffic.
A durable solution which can be installed quickly and with minimal disruption. Ideal for
laying on damp or contaminated surfaces, flexible enough to be laid over undulating substrates.
Standard Sheet
4mm thick designed for surfaces that are subject to heavy usage and movement (i.e. Timber)
and can be bonded and screwed down over the slippery surface quickly and simply to create
a tough, durable and safe floor or step finish. |
|
|
|
|
|
|
|
|
|
| GRP antislip on Decking |
DDA Compliant Nosing |
|
|
|
|
|
|
| |
|
|
| |
 |
|
|
|
|
|
|
Airports
Automotive
Food & Beverage
Oil & Gas Refineries
Processing Plants
Power Networks
Theme Parks
Railways |
Schools & Colleges
Utilities
Hotels
Golf Clubs
Leisure Centres
Local Authority
Marinas
Quarries & Pre-mix |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Colours |
Grades |
Quick Fitting |
Easy to Clean |
Our standard colours Yellow
Black
Grey
Red
Green
or other colours in accordance with British Standard RAL Guide. |
Anti-Slip is manufactured in FOUR grades:
Barefoot
Pedestrian
Industrial
Off-shore |
The panels and treads can be fitted in minutes and walked
on immediately providing little or no downtime. |
These panels and treads can be jet washed, steam cleaned
or scrubbed. In dry environments they can be wire brushed
or steam vacuum cleaned. Above all, periodic cleaning is
the only maintenance required. |
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
| |
|
|
